Product Line Overview
Product Line Overview

Professional Surface Protectants for Every Application

From salt removal to rust conversion to long-term barrier coatings, Salts Gone® offers a complete line of surface protectants engineered to stop corrosion at every stage. Explore our product families below.

A Complete System — Not Just a Single Product
Complete Corrosion Defense

A Complete System — Not Just a Single Product

Most corrosion protection fails because it only addresses one stage of the problem. A coating over salt-contaminated metal traps corrosion underneath. A salt wash without follow-up protection leaves metal vulnerable to the next exposure. Salts Gone®'s product line is designed as a system: remove the salt, convert any existing rust, seal the surface, and maintain the barrier over time.

Remove first, then protect — Salts Gone® chelation technology removes embedded salt ions at the molecular level. This is the essential first step — no coating or protectant can perform properly over salt-contaminated surfaces.
Convert existing rust — Rusts Gone™ transforms active rust into a stable, paintable iron phosphate compound. No need to grind back to bare metal — apply directly over rust and it becomes part of the protective barrier.
Seal and maintain — Under Gone™ and Thixo-Coat™ create long-lasting physical barriers that keep moisture and salt away from metal. Flexible, UV-stable, and easy to touch up for ongoing protection.
Shop All Products

Three Stages of Corrosion Defense

Each product in the Salts Gone® lineup targets a specific stage of the corrosion cycle. Used together, they provide comprehensive protection.

Stage 1: Salt Removal

Salts Gone®'s chelation formula bonds to sodium and chlorine ions at the molecular level, permanently removing them from metal pores, crevices, and surfaces where water alone cannot reach. This eliminates the primary catalyst that drives 80% of metal corrosion.

Stage 2: Rust Conversion

When existing rust is present, Rusts Gone™ converts iron oxide into a stable iron phosphate compound through a chemical reaction. The converted surface becomes a primer-ready foundation that actually improves coating adhesion compared to bare metal.

Stage 3: Barrier Protection

Under Gone™ (rubberized spray) and Thixo-Coat™ (thixotropic coating) create durable physical barriers that seal metal surfaces from moisture, oxygen, and future salt exposure. Both are flexible, UV-stable, and designed for real-world conditions.

Choosing the Right Protectant for Your Application

Salts Gone® — The Foundation

Every corrosion protection strategy starts with salt removal. Salts Gone® is the first step for any vehicle, vessel, or piece of equipment exposed to salt — whether from ocean spray, road brine, or de-icing chemicals. Available as a ready-to-use hose-end sprayer, gallon concentrate, and motor flush formula. Safe for all surfaces including paint, gel coat, aluminum, chrome, rubber, and plastic.

Under Gone™ — Rubberized Undercoating

Purpose-built for undercarriages, wheel wells, frame rails, and any surface exposed to road spray and debris. Under Gone™ applies as a rubberized spray that dries to a flexible, textured barrier. It flexes with the substrate, resists stone chips, and won’t crack in temperature extremes. Unlike wax-based undercoatings, it cures rock-hard and will not wash off or melt in summer heat.

Rusts Gone™ — Rust Converter & Encapsulator

For surfaces where rust has already taken hold, Rusts Gone™ chemically converts active iron oxide into a stable, paintable iron phosphate compound. No sandblasting or grinding required — apply directly over rust. The converted surface becomes a superior foundation for topcoats, primer, or additional barrier products like Under Gone™.

Thixo-Coat™ — Thixotropic Surface Protectant

A unique thixotropic coating that applies as a gel but flows into seams, crevices, and hard-to-reach areas before setting up as a durable barrier. Ideal for frame joints, body seams, door sills, and anywhere that spray-applied coatings can’t adequately penetrate. Self-leveling in confined spaces while staying put on vertical surfaces.

Commercial & Fleet Solutions

For municipalities, fleets, and industrial operations, Salts Gone® offers bulk purchasing, custom dilution systems, and technical support for large-scale corrosion management programs. Our commercial solutions have been trusted by NASA, state DOTs, marine operators, and oil & gas companies for over two decades.

Choosing the Right Protectant for Your Application

Ready to Build Your Corrosion Defense System?

Whether you need a single product or the complete lineup, we’re here to help you find the right solution for your application.

4.98
Based on 1,100+ verified reviews

What Our Customers Say

Trusted by boaters, drivers, fleet operators, and homeowners across the country.

This is a must have if you live in the rust belt. I use it on my truck and tractor. It's amazing stuff.

As a coastal homeowner, we are finally able to efficiently protect our property from the corrosive environment around us.

I have been using Salts Gone on my boat and jet ski now for 2 years. Best product I have ever used. Way better than the competitors.

We use Salts Gone on our plow trucks after each snow event and are very happy with the results! Clean trucks with no salt residue left behind.

Best salt fighting product on the market. Honest advertisements unlike the competitor.

What a shocking experience! My pickup is not only showing no signs of salt, it is cleaner than it was before!

Common Questions About Our Product Line

Choosing the right protectant for your application.

Yes — always. Applying any coating over salt-contaminated metal traps corrosion underneath, leading to premature failure. Salts Gone® removes embedded salt ions at the molecular level, giving your coating a clean foundation that dramatically extends its lifespan.
Under Gone™ is a rubberized spray coating ideal for broad surfaces like undercarriages, wheel wells, and frame rails. Thixo-Coat™ is a thixotropic gel that flows into seams, joints, and confined spaces before setting up. Think of Under Gone™ as your surface-area coating and Thixo-Coat™ as your seam-and-crevice specialist. They’re designed to work together.
That’s exactly what it’s designed for. Rusts Gone™ chemically converts active rust into a stable iron phosphate compound. No need to grind or sandblast to bare metal. Simply apply over the rusted surface and it transforms the rust into a primer-ready foundation.
Absolutely — they’re designed as a system. The ideal workflow is: 1) Salts Gone® to remove salt, 2) Rusts Gone™ to convert any existing rust, 3) Under Gone™ or Thixo-Coat™ as the final barrier coating. Each step builds on the previous one for maximum protection.
Yes. Salts Gone® is pH-neutral and safe for steel, aluminum, stainless steel, chrome, copper, brass, and galvanized surfaces. Under Gone™ and Thixo-Coat™ adhere to all common metals. Rusts Gone™ is specifically formulated for iron and steel where rust (iron oxide) is present.
Yes. We offer bulk purchasing, custom dilution systems, and technical support for fleets, municipalities, and industrial operations. Visit our Commercial Solutions page or contact us for a custom quote tailored to your operation’s needs.
Salt removal with Salts Gone® should be done after every salt exposure. Barrier coatings (Under Gone™ and Thixo-Coat™) provide long-term protection that lasts through multiple seasons under normal conditions. Touch-ups are easy and can be applied over existing coatings without stripping.